Hardeners and Toppings
Dry Shake Floor Hardeners
The industry's ultimate dry shake for industrial floors requiring additional abrasion resistance and impact protection. EMERYPLATE FF is engineered to be able to spread onto a newly placed, highly plastic slab and still achieve a flat floor. Rust-free performance is ideal for wet conditions.
L&M TRAP ROCK is a combination of 100% graded trap rock and portland cement. It is a polyhedral shaped, abrasion resistant, chemically inert, non-absorbent aggregate produced from igneous rock. This dense mineral aggregate is crushed into a polyhedral shape. It is carefully graded to assure ease of placement. This results in interlocking dense mass that produces high performance floors of excellent abrasion resistance.
A ready mixed, 98% pure quartz silica mineral aggregate, dry-shake hardener that increases floor surface durability from four to five times over normal concrete. It contains graded aggregates and proprietary admixtures that allow this product to be broadcast onto a highly plastic slab to achieve a flat floor. Colors and light reflective formulations are available.
QUARTZPLATE FF LIGHT REFLECTIVE is a ready-mixed, scientifically graded, 98% pure silica aggregate, non-metallic dry shake-on hardener which combines the abrasion resistance of the natural quartz aggregates with energy saving light reflectivity. These treated floors wear up to four times longer than normal concrete.
Emery Aggregate Floor Topping
For that needed abrasion resistant industrial floor topping we recommend DURATOP HP. This flowable natural metamorphic spinal aggregate produces a highly abrasion and chemical resistant solution for abusive impact and concrete floor wear conditions. The high concentration of the very abrasive resistant aggregates consisting of silica oxide, aluminum oxide, and ferric oxide assure a dense, tough floor resistant to impact and abrasive wear with a blend of cement to return floors to service in 48 hours.
The most durable floor system available. It is a flowable, emery/corundum, heavy duty topping for ACI Class 6 and 7 industrial floors. It is engineered to provide an extended working time and flowable performance for easy placement. EMERYTOP 400 produces a concrete floor surface that gives appreciably longer service life than normal high strength concrete, iron or trap rock toppings.
Liquid Chemical Hardeners, Densifiers
A proprietary, chemical hardening solution that is formulated to increase the wear resistance and surface strength of concrete floors that have been mechanically ground, smoothed and polished. This product is a component of the FGS PERMASHINE Floor Rejuvenation Process. Answers the unique demands of a flat, ground and diamond polished floor better than any other product.
a VOC-free, environmentally friendly lithium silicate concrete floor densifier and hardener. Penetrates bare concrete surfaces and immediately transforms weak calcium hydroxide and calcium carbonate compounds found in concrete into dense, insoluble, durable flint-like wear surfaces.
Our "top of the line," new generation concrete chemical hardener, densifier, dustproofer, and sealer. SEAL HARD hardens and seals the concrete near surface wear zone better than any product in its class. It prevents tire marking and minimizes contaminant penetration. SEAL HARD is recommended for use on ACI Class 4, 5, and 9 (super flat) floors, and for Class 6 industrial floors. USDA approved. Ten year warranty against dusting available.