Trap Rock Aggregate, Dry Shake Surface Hardener

Product Description

L&M TRAP ROCK is a combination of 100% graded trap rock and portland cement. It is a polyhedral shaped, abrasion resistant, chemically inert, non-absorbent aggregate produced from igneous rock. This dense mineral aggregate is crushed into a polyhedral shape. It is carefully graded to assist ease of placement. This results in interlocking dense mass that produces high performance floors for abrasion resistance.

Properly placed, L&M TRAP ROCK reinforces the top c-¼ inch (3-5 mm) of high traffic floors with one of the densest, most abrasion resistant aggregates on the market today.

Basic Use: For heavy duty industrial floors subjected to severe traffic, high abrasion and wear. L&M TRAP ROCK floors are ideal for low maintenance floors in warehouses, meat processing plants, freezers, floors of grocery chains and distribution centers, heavy industrial and equipment plants, truck, tractor and automotive plants, foundries, and high traffic loading ramps.

Features and Benefits

  • 100% igneous rock aggregate. High resistance to abrasion.
  • Heat-resistant. Recommended for factory use.
  • Densifies floors due to unique polyhedral structure to resist the penetration and attack of oils and other contaminants.
  • High resistance to friability by distributing single point loads to prevent fracturing, spalling and pitting.

Short Spec:

033000: Trap Rock Hardened Concrete Floor. Natural Trap Rock Aggregate, pre-mixed with cement, minimum 1.0 lbs/sq.ft. (5 kg/m2). Note to specifier: Up to 1.5 lbs./sq.ft (7 kg/m2.) for heavy duty application. “L&M TRAP ROCK” by L&M Construction Chemicals, Inc.

May 2, 2008