L&M Product Literature Library


L&M Product Guide

This guide to concrete construction chemicals highlights 33 of our most requested products.

  • Concrete Curing Compounds
  • Concrete Curing and Sealing Compounds
  • Concrete Evaporation Control and Reducer
  • Concrete Form Treatments
  • Non-Shrink Grouts
  • Dry Polished Concrete
  • Concrete Dyes
  • Liquid Hardeners
  • Dry Shake Floor Hardeners and Toppings
  • Concrete Joint Protection and Crack Repair
  • Concrete Patch and Repair Products
  • Repellents and Concrete Surface Protection

Guide to FGS PermaShine Polished Concrete

FGS PermaShine turns old, worn floors into smooth, easy-to-clean, dust-free concrete floors that resist wear and marking, with an aesthetically pleasing, long lasting medium to high gloss finish. FGS PermaShine requires little to no "off-limits" shut-down of operational facility. The installed cost of an FGS PermaShine floor is comparable to a good epoxy or urethane coating project and requires minimal maintenance, resulting in significant life cycle cost savings over any other floor treatment.

This free guide to FGS PermaShine explains the 8 step process in detail with colorful, easy-to-understand illustrations that demonstrate how virtually any concrete floor can look and perform "better than new."

Polished Concrete and LEED v4.0 Certification

The complete guide to LEED v4.0 Certification with Polished Concrete is available in this 36-page White Paper.

Due to the proprietary content of this document, registration is required for download.

Upon registration, you will receive an immediate e-mail with a link to download the White Paper.

Please click here to receive your copy.

VIVID DYE Brochure and Color Chart: Ideal use with FGS PermaShine Concrete Floor System

VIVID DYE brings the beauty of color to your polished concrete floor. Discover the beauty of colored, polished concrete with this new brochure and color chart.

EMERYTOP 400, The World’s Toughest Floor

If you’re in the waste transfer business or dealing with heavy industrial, you need a floor that stands up to impact, abrasion, and chemical abuse.

You need EmeryTop 400. The World’s Toughest Floor.

EmeryTop 400 downloadable brochure details three of the most dangerous attacks on waste transfer, tipping, and heavy industrial floors.

Complete with independent test data, comparisons, and real-world photos, this guide is a must for architects, engineers, project managers, floor owners, and maintenance departments who want to know more about the World’s Toughest Floor.

Download a free copy of the brochure and technical data.

SEAL HARD: Seals, densifies, hardens, & dustproofs concrete floors.

The worlds finest concrete densification system increases the strength and beauty of concrete floors. Seal Hard deeply penetrates concrete surfaces to seal densify, harden, and waterproof. Seal Hard floors get better with time, protecting your concrete investment.

AQUAPEL: Water Repellent - Stop Concrete Damage From Rain, Snow, and Salt.

AQUAPEL is a new generation, 100% reactive, waterborne silane-siloxane sealer. This clear, penetrating, breathable water repellent is ideal for use on interior and exterior, above grade, traffic bearing concrete. AQUAPEL penetrates concrete surfaces and chemically bonds directly with the substrate which results in a surface that is highly resistant to the attacks of both moisture and salt.

FGS/PermaShine: Polished Concrete Floors Green Globe Credits

Following the Green Globes on-line predesign tool, the FGS/PermaShine Polished Concrete Floor System can have an impact on more than 80% of the sections within the rating system’s assessment areas, which are used to determine a building’s environmental and energy performance. This determination assumed a polished concrete system included a newly poured or existing concrete foundational slab, a certified installer to grind the slab, and application of one or more of the FGS/PermaShine family of products.

How polished concrete can save you thousands and add years of beauty to your concrete floor.

It is seldom that a concrete floor fails structurally, but they all suffer from the abuse of abrasion. In other words, all concrete floors, over time, will wear out.

Until now, these old, worn out concrete floors would have to be replaced, or at least have a topping applied to the surface. Repair and replacement processes are not only costly, but also require a lot of facility down time. A renovated or replaced concrete floor could be out of service for days or weeks.

Today, it's different. A worn concrete floor can be quickly resurfaced and returned to service in hours, not days or weeks. This new rejuvenation process is the diamond polishing of concrete floors, or, as we at L&M call it, FGS PermaShine Polished Concrete Floor System.

This Special Reprint from Concrete News explains how polished concrete adds years of great looks, low maintenance, and cost savings to new or existing concrete floors.